COP - Cop operational and access glove FG10TS black

The FG10TS black cop tactical and access glove is a real all-rounder. It has cut and puncture protection on the inside of the hand. It is also flame-retardant and has impact protection on the upper knuckles. The FG10TS deployment and access glove offers protection against injuries caused by sharp and blunt objects as well as heat and fire. The upper side of the glove is made of a lightweight synthetic fiber with a silicone coating, making it both flame-retardant and abrasion-resistant. The inside made of the finest leather protects the hand and allows good handling, for example during searches, when applying handcuffs and operating firearms.
The material is reinforced in the knuckle area to protect against thrown objects and blows. Plastic reinforcement on the top of the hand and leather reinforcement on the knuckles also cover the normally unprotected area under a forearm protector. You should no longer use damaged gloves. The thumb and index finger are equipped with a touchscreen function.

Tested according to EN388:2016:
- Abrasion resistance: Category 2
- Cut resistance (COUP): Category 3
- Tear propagation resistance: Category 2
- Puncture resistance: Category 2
- Cut resistance (TDM): Category B
- Impact protection: P

tested according to EN407:2004:
- Burning behavior: Category 4
- Contact heat: Category 2
- Convective heat: Category 4
- Radiant heat: Category 4
- Resistance to small liquid metal splashes: Category X
- Resistance to large quantities of liquid metal: Category X

Care instructions: Depending on the intensity of use and soiling of the material, we recommend cleaning by hand washing. Among other things, a dirty surface can impair the touchscreen function of the glove. We also recommend increasing the sensitivity of the touch display on the device so that input is easier.