Hydracell - HydraCell Lantern Combo black

Produkt-Highlights

• Funktionale Ausführung
• Für den vorgesehenen Einsatz geeignet
• Praktische Ergänzung der Ausrüstung

The HydraCell Lantern Combo black provides you with reliable light via the lantern or the floodlight that is already included. The Cube Lantern's integrated energy cell generates its own power using two easily replaceable anode energy plates. These are activated simply by filling the integrated tank with salt water.
The HydraCell lantern can charge and supply power to cell phones or other USB-chargeable small devices in emergencies, when there is no power grid or during power outages. It is important to note that the lantern is not intended as a classic charger, but only for occasional emergency charging in specific situations. It has a standard USB output for charging and a 2.6 mm DC charging output for supplying a variety of small devices, such as the included LED floodlight.

Directions:
1. Release the lantern head by pressing the two side retaining clips and then removing it by pulling upwards.
2. Turn the salt filling cap clockwise and lift it up at the same time.
3. Fill both internal chambers evenly with an 8% saline solution up to the semicircular recess in the chamber partition.
4. Replace the salt filling cap by turning it. Rinse the surface with fresh water. Dry with a cloth. Put the lantern head on and fasten it by pressing until the retaining clips click into place.

- Energy cell: HydraCell Cube energy cell

Scope of delivery:
- HydraCell Cube Lantern
- Set of 2 (2 pieces each) anode energy plates)
- HydraCell Floodlight

Duration:
- Hand charges per plate set: 6 to 8 (depending on the charging capacity of the respective mobile phone batteries)
- Lighting time per plate set: 500 hours (bright setting), 100 hours (weak setting)
- Cube energy cell lighting time: 900 hours (bright setting), 1800 hours (weak setting)

Dimensions:
- Cube Lantern: 238 x 95.5 x 94 mm
- Floodlight: 84 x 84 x 36 mm